menü simgesi Categories
Actuonix

Actuonix Micro Linear Electric Actuator, L12-100-50-6-S, Control: Limit Switch, 6V

Product Code : 03.05.005.077
3,145.15 TL + VAT
3,774.18 TL (VAT Included)
  • Features
  • Payment Options
  • Comments (0)
  • Actuonix Micro Linear Electric Actuator with Limit Switch ( -S ), Rod Type, 100mm Stroke, 50:1, 6V 


    Actuonix L12-S Micro Linear Actuators (Linear Motor) are designed with, PMDC (permanent magnet DC) motor and rectangular cross-sectional area to provide more power, which is the general feature of the L12 series. The most attractive aspect of the L12 series electric piston is the wide range of choices for different needs (L12-S 24 variants and L12 series 84 variants). 

    Actuonix L12-100-50-6-S linear actuator is widely used in medical devices, space stations (Actuonix actuators were used in the International Space Station), aerospace, industrial automation and automotive projects with its compact small and high-speed structure. The 50:1 reduction ratio actuators are the fastest linear actuators of the L12-S series.

    The L12-S series products include a limit switch for motion control. The actuator can move until the stroke is within 1mm of the travel distance; when it reaches this distance, the limit switch stops the servo movement. The point at which the limit switches stop the movement is factory-adjusted.

    The Actuonix L12-100-50-6-S servo actuator is very easy to control. When you apply voltage to the actuator, it will lengthen, and when you reverse the polarity, the actuator will shorten. This voltage reversal can be done with a DPDT switch or by using an H-bridge circuit. However, Actuonix L12-S series actuators cannot be used with the LAC control board.

    The Actuonix L12-100-50-6-S linear actuator operates on a nominal 6V but is also available in a 12V version. If the L12-S Series doesn't meet your power needs, check out the more powerful L16-S series!

    All Actuonix linear actuators are shipped with a hardware/assembly kit to simplify installation.



    Actuator Types in the L12-S Series


    This Product L12-100-50-6-S :

     L12-100-50-6-S 
    L12 100 50 6 S
    Rod Type  100mm: stroke length 50:1 gear reduction ratio  6V nominal supply voltage End of Stroke Control: limit switch


    Compare this product with others in the L12-S Series:


    Gearing Options

    50:1

    100:1

    210:1





    Stroke

    10mm




    30mm




    50mm




    100mm




    L12-S Technical Features




    Gear Ratio 50:1 100:1 210:1
    Peak Power Point 17N @ 14mm/s 31N @ 7mm/s 62N @ 3.2mm/s
    Tepe Efficiency Pointı 10N @ 19mm/s 17N @ 10mm/s 36N @ 4.5mm/s
    Maximum Speed (no-load) 25 mm/s 13 mm/s 6.5 mm/s
    Maximum Force 22N 42N 80N
    Back Drive Force 12N 22N 45N

    Stroke Options

            10mm                   30mm                  50mm                   100mm
    Mass 28g 34g 40g 56g
    Repeatibility (-I,-R,-P) ±0.2mm ±0.2mm ±0.3mm ±0.5mm
    Maximum Side Load 50N 40N 30N 15N
    Closed Length 62mm 82mm 102mm 152mm
    Potantiometer (-I,-R,-P) 1kΩ/mm ± 50% 3kΩ/mm ± 30% 6 kΩ/mm ± 30% 11 kΩ/mm ± 30%
    Voltage Options 12V / 6V
    Maximum Input Voltage 13.5V / 7.5V
    Standby Current 3.3mA / 7.2mA
    Stall Current 246mA / 460mA
    Working Temperature –10°C to +50°C
    Maximum Duty cycle % 20
    Noise 55 dB,  @45 cm 
    Ingress Protection IP-54
    Mechanical Backlash 0.2mm
    Maximum Static Force 200N


    Technical Drawing


    actuonix-L12-boyutlar.jpg (139 KB)

    Links


    L12 Series Actuator Datasheet: Actuonix L12 Datasheet
    L12 Series 3D Model (IGES) 10, 30, 50 and 100mm: L12 3D Models (IGES)
    L12 Series 3D Model (STP): L12 3D Model (STP)

Prepared by  T-Soft E-Commerce.